Maxi Gel Tank Agarose 15x25cm

Labpro Scientific’s 100% Electrophoresis gel Tank (15x25cm) is designed for quick screening a large number of samples with limited agarose (100ml) usage. It is ideal for PCR, RFLP analysis, or plasmid screening. The microtiter plate format can run all samples, as well as standards and blanks in under 90 minutes. The microtiter format combs are designed for quick loading with a multichannel pipette. The combs accommodate multiple loading by a micro pipetter, leaving room for molecular weight markers. The LP12000 is constructed of durable acrylic, for years of faithful use.

SPECIFICATIONS

Height Width Length
Unit Dimensions: 7.5cm 27.0cm 31.0cm
Gel Dimensions: 23.5cm 15.0cm

CAPACITY

Maximum Sample Capacity: 200 Samples (4 Combs, 50 Samples Ea.)
Buffer Capacity: 850ml
Distance Between Electrodes: 19.0cm
Maximum Voltage: 200V

ORDERING INFORMATION
CATALOG# DESCRIPTION

LP12000 - ELECTROPHORESIS SYSTEM
(15X25CM) *Comes complete
with vented lid, UVPT casting
tray, two 1.5mm x 30 tooth combs,
comb holder and power cords.

ACCESSORIES AND REPLACEMENT PARTS
CATALOG# DESCRIPTION

LP12020 - LP12000 UVPT Casting Tray
LP10500 - Replacement Power Cords
LP12200 - Replacement LP12000 Tank
LP12300 - Replacement LP12000 Lid
LP12100 - Comb Holder Large
LP11305 - Replacement LP12000
Electrode Assembly
LP10505 - Replacement Tank Connector
Kit

ADDITIONAL COMBS AVAILABLE
CATALOG# DESCRIPTION WELL VOLUME WIDTH PER SAMPLE

LP11045 - 1.5mm x 12 tooth 2.8mm 2.8μl
LP11050 - 1.5mm x 15 tooth 2.2mm 2.2μl
LP11060 - 1.5mm x 20 tooth 4.7mm 4.7μl
LP11065 - 1.5mm x 25 tooth, MCP** 5.8mm 8.7μl
LP11070 - 1.5mm x 40 tooth 4.0mm 6.0μl
LP11075 - 1.5mm x 50 tooth, MCP** 2.9mm 4.4μl


The LP12000 is designed for nucleic acid screening electrophoresis. The maximum suggested applied voltage for the electrophoresis of DNA in agarose gels using the LP12000 is 170 volts. In a 1% TBE gel, this translates into a run time of approximately 1 hour. Lower voltages may be used, of course, and as a general rule, a 85 volt run will take twice as long as a 170 volt run. Higher voltages may be used to decrease run time; however, if the unit is being operated at higher voltages than 170 volts the heat generated during electrophoresis may decrease sample resolution. Such artifacts may be avoided by running the unit in a cold room or adding 1X electrophoresis buffer “ice cubes” to keep the unit properly cooled. The suggested run parameters for the electrophoresis of RNA